Die Grinder Deburring Tools Best Tungsten Carbide Rotary Burr Double Cut Rotary Cutting Burrs Set

Description:

Product Description

Material	100% Tungsten Carbide Raw Material
Grade	YG6/YG6C/YG8/
Density	14.60-14.8g/cm³
Application	weld preparation, weld smoothing, deburring, chamfering, deflashing, and scale removal, wood carving, farriers, metalsmithing,
Hardness	91.4-94 HRA
TRS	2400-2800MPA

Send email to us

Product Detail

Product Tags

Description

Significantly better stock removal rate than burrs with a conventional cross cut.
Saves money and time through its very high stock removal rate on key materials.
Comfortable working with reduced vibration and less noise.
Double-cut style has rows of cutting teeth cut in two intersecting directions for fast material removal and a rougher finish.
Long service life and high cutting capacity
High safety during working
Easy operation

Materials that can be worked

10pcs-14inch-6mm-shank-diameter-tungsten-crabide-rotary-burr-bits-set-with-plastic-box-product

Steel, cast steel
Stainless steel (INOX)
Non-ferrous metals
Cast iron
Various plastics
Ferrous and Wood

Specification

What should we pay attention to when we use it?

1. Speed /RPM
The speed at which you use your carbide burrs in your rotary tool will depend on the material you're using it on and the contour being produced but it's safe to say you do not need to exceed speeds of 35,000 RPM.
2. Apply only a little pressure
As with all drill bits and burrs, let the burr do the work and apply only a little pressure otherwise the cutting edges of the flutes will chip away or become smooth too quickly, reducing the life of your burr.
3. Keep The Carbide Burr On The Move
When using your carbide burr try not to keep it still for too long as this will prevent the burr from digging and jabbing into your material causing unsightly marks and roughness.