Fengke Unground/Ground Soild Tungsten Carbide Rods Blanks
Carbide Rods Features
-- HIP sintering-- 89-93HRA with high wear resistance
-- Polished surface
-- 100% Virgin pure raw materials
-- Flexible payment terms (L/C,T/T, western union, etc)
-- Certificate of origin available
Specifications Of Standard Sizes:
| WC Grain size range | 0.3~0.5μ.m; 0.5~0.9μ.m; 1.0~1.3μ.m; 1.4~2.0μ.m. |
| Diameter range | 0.33mm--60mm |
| Length range | 3mm--1000mm; |
| Diameter Grade | h4(H4), h5(H5), h6(H6), h7(H7), h8(H8), h9(H9). |
| Surface Roughness | Polished Ra 0.04 or unpolished |
| Remarks | OEM acceptable |
RECOMMEND GRADES AND SPECIFICATIONS
| Grade/ Properties / Application | |||||
| Grade | Equal to ISO Category Number | Performance | Performance&application recommended | ||
| Density | Bend Strength | Hardness | |||
| G/Cm 3 | N/mm 2 | HRA | |||
| YG6X | K10 | 14.8-15.1 | ≥1560 | ≥91.0 | Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. |
| YG6A | K10 | 14.7-15.1 | ≥1580 | ≥91.0 | |
| YG6 | K20 | 14.7-15.1 | ≥1670 | ≥89.5 | Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. |
| YG8 | K30 | 14.6-14.9 | ≥1840 | ≥89 | Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. |
| YG10 | 14.5 | 2400 | 91.5 | Fine grain alloy, good wear resistance,Used for processing hard | |
| wood, veneer board,PCB,PVC and metals. | |||||
| YL10.2 | 14.5 | 2400 | 91.8 | Forming or stamping dies for metal powders and nonmental powders. | |
| YG13X | 14.3 | 2600 | 89.5 | For oil cone dril bits, for medium soft and medium-hard rocks. | |
Carbide Rods Appliaction
Various carbide grades with stable properties have been widely recognized by worldwide makers of tools. Tungsten carbide rods are used for cutting aluminum alloy, cast iron, stainless steel, refractory alloy steel, nickel-based alloy, titanium alloy, and nonferrous metals. They are widely used for HSS Cutting tool, carbide end mills, carbide cutting tool, NAS cutting tool, aerospace cutting tool, carbide drills, pilot reamer, electronics cutter, step drill, metal cutting saw, carbide burrs, carbide tipped cutter etc.
