This article presents a woodworking helical cutting heads partner-carbide indexable insert!
The caride indexable insert has ultrafine-grained cemented carbonide. This is an imported, slim-grain material, with no tear-out and 20-times longer working time than the normal type. It also has high hardness and toughness.
High craftsmanship, excellent concentricity of center hole, tolerances up to + /-0.1mm High-speed cutting is characterized by high stability, small knife lengths, and low cutting power. Point cutting, which can prevent tearing in wood processing, is as smooth and easy as a mirror.
Standard carbide knife specification: 14 * 14 * 2.0-30 degmm 15 * 15 * 2.5-30 deg/ 37 degmm
The Spiral Cutter Head has a higher working efficiency than the straight knife. It can also be used on the four-side planeer, which increases its effectiveness by several times. Safety, durability, noise reduction, long life expectancy, and processing efficiency are some of the benefits of carbide indexable knives.
Useful tips
1. To change a cutting blade, simply clean it and then rotate it 90°.
2. Make sure to remove all debris and dust from the cutterhead to prevent blade breakage.
3. Slide the blade slowly and gently, pressing down on the bottom. Turn the screw clockwise and the blade will press against its positioning table.
4. Before using the blade, make sure you inspect it. If the blade is broken, replace it immediately.
You can replace your straight knife with carbide indexable inserts by following the advice above. What do you think? You are invited to join in the discussion.
You can find more information about tools and supplies by following our regular updates.
Post time: Nov-22-2022
